MikroTik RouterOS v6.33 publicado
Está disponible para la descarga la versión v6.33 del RouterOS con una gran lista de agregados y nuevas funcionalidades.
Destacamos las mejoras a nivel inalámbrico con el paquete Wireless-cm2 en ésta versión.
La lista de cambios completa es:
What's new in 6.33 (2015-Nov-06 12:49): *) dns - initial fix for situation when dynamic dns servers could disappear; *) winbox - dropped support for winbox v3.0beta and v3.0rc (use winbox v3.0); *) dhcpv6 - various improvement and fixes for dhcp-pd client and ippool6; *) defconf - fixed rare situation where configuration was only partially loaded; *) net - fix possible never ending loop when bad CDP discovery packet is received; *) log - make default disk file name to reside in flash dir if it exists; *) romon - change port list to be not ordered in export; *) capsman - limit number of simultaneous DTLS handshakes; *) capsman - fixed memory leak on CAP joining CAPsMAN when ssld is used; *) winbox - added allow-fast-path to eoip, gre & ipip; *) winbox - do not show power-cycle properties on non poe ports; *) l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817; *) webfig - some of the setting were shifted to the right; *) packages - allow to reinstall from bundle to separate packages & vice versa; *) packages - prefer out of bundle packages when both of them are installed; *) packages - fix a problem of upgrading bundle package to non bundled ones; *) ipsec - force flow cache validation once in 1h; *) winbox - make sure that all setting names get shown in full; *) winbox - added poe power-cycle-ping settings to ethernet interfaces; *) ppp - handle properly case were ppp client is given same address for local & remote end; *) winbox - added vlan-mode & vlan-id to virtual-ap interface; *) winbox - added timeout column to ipv6 address lists; *) winbox - show SFP Tx/Rx Power properly; *) winbox - added min-links to bonding interface; *) winbox - do not show health menu on RB951Ui-2HnD; *) winbox - added support for Login-Timeout & MAC-Auth-Mode in hotspot; *) cerm - added option to disable crl download in '/certificate settings'; *) winbox - make user ssh key import work again; *) webfig - make "Copy to Access List" work in CAPsMAN Registration Table; *) userman - fix report generation problem which could result in some users being skipped from it; *) winbox - fix to allow cpu-port as mirror-target *) proxy - error.html parsing enhancement to improve performance *) CCR1072 - improve ether1 performance under heavy load *) routerboard - indicate RouterBOOT type in /system routerboard print; *) mpls - properly use mpls mtu for routes; *) cerm - fix key description for signed certificates; *) trafflow - report flow addresses in v1 and v5 without NAT awareness; *) hotspot - add mac-auth-mode setting for mac-as-passwd option; *) hotspot - add login-timeout setting to force login for unauth hosts; *) auto-upgrade - fixed auto upgrade for smipsbe; *) dns - do not create duplicate entries for same dynamic dns server addresses; *) ipsec - fix set on multiple policies which could result in adding non existent dynamic policies to the list; *) email - allow server to be specified as fqdn which is resolved on each send; *) fastpath - eoip,gre,ipip tunnels support fastpath (new per tunnel setting "allow-fast-path"); *) ppp, pptp, l2tp, pppoe - fix ppp compression related crashes; *) cerm - also accept downloaded CRLs in PEM format; *) userman - added 'history clear' to allow flushing undo history, which may take up significant amount of memory for huge databases with hundreds of users; *) health - fix voltage for CRS109, CRS112 and CRS210 if powered from external adapter; *) userman - added phone number support to signup form; *) ip pool6 - try to acquire the same prefix if info matches recently freed; *) ipsec - fix transport mode ph2 ID ports when policy selects specific ip protocol on initiator; *) ipsec - use local-address for phase 1 matching and initiation; *) route - fixed crash on removing route that was aggregated; *) ipsec - fix replay window, was accidentally disabled since version 6.30; *) ssh - allow host key import/export; *) ssh - use 2048bit RSA host key when strong-crypto enabled; *) ssh - support RSA keys for user authentication; *) wlan - improved WMM-PowerSave support in wireless-cm2 package; *) pptp & l2tp - fixed problem where android client could not connect if both dns names were not provided (was broken since v6.30); *) auto-upgrade - added ability to select which versions to select when upgrading; *) quickset - fixed HomeAP mode; *) lte - improved modem identification to better support multiple identical modems; *) snmp - fix system scripts table; *) tunnels - eoip,eoipv6,gre,gre6,ipip,ipipv6,6to4 tunnels now support dns name as remote address; *) fastpath - active mac-winbox or mac-telnet session no longer suspends fastpath; *) fastpath - added per interface fastpath counters; *) fastpath - added trafflow support in basic ipv4 and fasttrack ipv4 fastpath; *) ppp - added on-up & on-down scripts to ppp profile; *) winbox - allow to specify dns name in all the tunnels; *) pppoe - added support for MTU > 1492 on PPPoE; *) cerm - fix scep server certificate-reply degenerate PKCS#7 signed-data content; *) ppp-client - added default channels for Alcatel OneTouch L100V; *) defconf - fix for boards that had bridge with only wlan ports; *) ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled); *) cerm - use certificate file name for imported cert name; *) fetch - fixed error message when error code 200 was received; *) cerm - rebuild crl for local ca if crl file does not exist; *) winbox - make directed broadcasts work for neighbor discovery; *) upnp: automatically adjust mappings to new external ip change; *) ppp - added ppp interface to upnp internals/externals if requested; *) ppp - when adding ipv6 default route use user provided distance; *) userman - allow to correctly enable CoA on router; *) cerm - show crl nextupdate time; *) ppp - added CoA support to PPPoE, PPTP & L2TP (Mikrotik-Recv-Limit, Mikrotik-Xmit-Limit, Mikrotik-Rate-Limit, Ascend-Data-Rate, Ascend-XMit-Rate, Session-Timeout); *) ppp - added new option under "ppp aaa" - "use-circuit-id-in-nas-port-id"; *) userman - refresh active sessions/users view dynamically; *) package - added version tag and show everywhere alongside of version number; *) wlan - improved 802.11 protocol single connection TCP performance for ac chipset with cm2 package.